Array and Expansion
Module Hard Drive
Carrier Indicators
Figure 11 Hard Drive Sled LEDs
Table 5 Hard Drive Sled LEDs
Quantum DXi6900 G1 User's Guide
The individual hard drive sleds contain LEDs that indicate the health
condition of the hard drive (see
LED
LEDs off
Drive service action
allowed LED (blue)
Drive fault (amber)
Drive active LED
(green)
Caution: Do not remove a hard drive that has not failed. Instead,
only remove a drive that has failed. If you accidentally
remove a good drive, wait 30 seconds before reinserting
the drive.
Chapter 1: Basic Operations
DXi6900 G1 Array and Expansion Modules
Figure 11
and Table 5).
Description
No power.
Solid – It is safe to remove the hard drive
from the array for service.
Solid – The hard drive has failed. Contact
Quantum customer support.
Blinking – Drive volume or Array module
locate function.
Solid – No activity on the hard drive.
Blinking – There is activity on the hard
drive.
Note: It is normal to see drive activity even
when the DXi is not reading or
writing data.
Drive service
action allowed
Drive fault
Drive active
17