Table 7 Expansion Module Leds And Buttons - Quantum DXi6900 Field Service Manual

Chapter 1: Basic Operations
DXi6900 G1 Array and Expansion Modules
Table 7 Expansion Module
LEDs and Buttons
22
Button/LED
SAS host/expansion
fault (amber)
SAS host/expansion
activity (green)
Ethernet link rate
(green)
Ethernet activity
(green)
Service action allowed
(blue)
Service action required
(amber)
Power (green)
Seven segment display
(green)
Standby power (green)
DC enabled (green)
Service action allowed
(blue)
Service action required
(amber)
AC enabled (green)
Description
Both Off - cable unplugged.
Fault Off and Activity On - all links
operating.
Fault On and Activity Off - at least one
link active and at least one link fault.
Solid - port speed 1000MB/sec.
Off - port speed 10/100MB/sec.
Solid - link established.
Blinking - indicates port activity.
Solid - safe for Quantum field service. to
remove ESM from slot.
Solid - ESM has failed and requires
attention.
Note: Fault light will be on during power
up and will turn off after self-test
sequence completes.
Solid - power is being applied to the ESM.
Displays tray ID and error code. (Displays
00 when the Array module is operating
normally.)
Solid - main DC power is off and 5V
standby power is on.
Solid - DC power rails are within specified
limits.
Solid - safe for Quantum field service. to
remove power supply from slot.
Solid - power supply has failed and
requires attention.
Solid - power is being applied to the power
supply and the power switch is on.
Quantum DXi6900 G1 User's Guide