Logging Off Of The Dxi6900 G1; Locating Dxi6900 G1 Serial Numbers - Quantum DXi6900 Field Service Manual

Logging Off of the
DXi6900 G1

Locating DXi6900 G1 Serial Numbers

Quantum DXi6900 G1 User's Guide
If you are unable to log on, verify that the password is correct, then
try again. If you are still unable to log on, contact your DXi6900 G1
administrator.
Caution: More than one Administrator can log on to the DXi at a
time. If two Administrators attempt to make configuration
changes on the same page at the same time, it is possible
that one Administrator's changes will overwrite the other's.
Always coordinate configuration changes with other
Administrator users.
When you are done working in the DXi6900 G1 remote management
console, click Logout on the upper right of the remote management
console to end your session.
Note: If the DXi6900 G1 remote management console is idle for more
than 30 minutes (default setting), the system logs off the user.
The inactivity timeout can be changed on the Login Session
page.
You will need the system serial number, the Node serial number, and the
Expansion module serial number at various times:
• System Serial Number - You need this number to contact Quantum
Support or to add a licensed feature.
• Node Serial Number - You need this number for a Node
replacement component.
• Array Module (RBOD) and Expansion Module (EBOD) Serial
Number - You need this number for an Array module or Expansion
module replacement component.
You can locate the system serial number on the Home page of the
remote management console.
Chapter 1: Basic Operations
Locating DXi6900 G1 Serial Numbers
29