Required Dxi6900 G1 Bios Settings - Quantum DXi6900 Field Service Manual

Chapter 4: BIOS Settings

Required DXi6900 G1 BIOS Settings

Required DXi6900 G1 BIOS Settings
Table 17 DXI6900 G1 Required
BIOS Settings
BIOS Field Name
Memory Settings
System Memory Size
System Memory Type
System Memory Speed
System Memory Voltage
Video Memory
234
The DXi6900 G1 system board BIOS settings must be set to the required
values for correct system operation.
Note: Check CSWeb (https://csweb.quantum.com) for the latest
hardware specification with required BIOS settings.
To verify the DXi6900 G1 BIOS settings:
1 As the system boots, press F2 to display the System Setup Main
Menu.
2 Select System BIOS and press <Enter>.
3 Verify that all BIOS settings are set to the Quantum required value,
and make any changes as needed (see
Note: Required values that differ from the default values are
shaded yellow. Pay close attention to these fields.
4 Press <ESC> to exit the BIOS, and save any changes.
Note: To verify iDRAC BIOS settings are correct, see
Settings on page 171.
Values (Default First)
128.0 GB
ECC DDR3
1866 MHz
1.5V/1.35
16MB
Table 17).
Verifying iDRAC
Quantum Required Value
128.0 GB / 256.0 GB
ECC DDR3
1866 MHz
1.5V/1.35
16MB
Quantum DXi6900 G1 User's Guide