Figure 54 Checking Fan Status
Quantum DXi6900 G1 User's Guide
Removing a Failed Cooling Fan from the Node
To remove the failed cooling fan from the DXi6900 G1 Node:
1 Shut down the system (see
System
on page 23).
2 Remove the Node cover (see
page 78).
3 Identify the failed fan using the numbers on the cooling fan
assembly.
4 Press the fan release tab and lift the cooling fan out of the cooling
fan assembly (see
Chapter 3: FRU Removal and Replacement Procedures
Turning On and Shutting Down the
Opening and Closing the Node
Figure
55).
Replacing Node Cooling Fans
on
101