Figure 68 Removing And Installing The Expansion Card Riser 2 - Quantum DXi6900 Field Service Manual

Figure 68 Removing and
Installing the Expansion Card
Riser 2
Quantum DXi6900 G1 User's Guide
3 Disconnect any cables connected to the expansion card.
4 Holding the touch points, lift the expansion card riser 2 or 3 from
the riser connector on the system board (see
Figure 69).
Expansion card riser 2
Front riser guide
Chapter 3: FRU Removal and Replacement Procedures
Replacing Node Expansion Cards
Figure 68 and
Back riser guide
Expansion card riser 2
connector
123