Chapter 3: FRU Removal and Replacement Procedures
Replacing an Array Module BBU
Figure 132 Array Module
Controller Failure LEDs
Port 1
Service action allowed
Service action required
210
Port 2
ID/
Diag
Removing a Failed Array Module BBU
To remove the failed Array module BBU:
1 Prepare the controller air blocker by removing it from the packaging
and folding it inward at right angles so it is ready to insert into the
open controller slot (see
Controller A
Port 1
Port 2
ID/
Diag
Figure
128).
Quantum DXi6900 G1 User's Guide
Controller B
|O|O|
Port 1
Port 2
ID/
Diag