Figure 138 Expansion Module
ESM Canister Failure LEDs
Service action required
Service action allowed
Quantum DXi6900 G1 User's Guide
• Service Action Allowed - This LED is lit when the component
has failed and is ready to be replaced.
Port 1
ID/Diag
Removing a Failed Expansion Module ESM
To remove the failed Expansion module ESM canister:
1 Disconnect the SAS cables from the failed ESM canister.
2 Pull the handles out and toward the sides of the controller canister,
and pull the Expansion module ESM canister out of the Expansion
module chassis (see
Chapter 3: FRU Removal and Replacement Procedures
Replacing an Expansion Module ESM Canister
ESM A
Port 1
ID/Diag
Figure
139).
ESM B
217