Array and Expansion
Module Front Panel
Features and Indicators
Quantum DXi6900 G1 User's Guide
•
Array Module Rear Panel Indicators
•
Expansion Module Rear Panel Indicators
Note: Refer to the port numbering labels on the back of the Array
and Expansion module chassis to help you determine the
correct port connections.
Caution: Do not disconnect any SAS cables from the Array or
Expansion modules during normal system operation.
Unplugging a SAS cable while the system is powered on
may result in data loss.
LED indicators and buttons are located behind the optional rack bezel
on the front of the Array modules (RBODs) and Expansion modules
(EBODs) (see
Figure 10
DXi6900 G1 Array and Expansion Modules
and Table 4).
Chapter 1: Basic Operations
15