Table 2 Rear Panel Connectors - Dxi6900 G1 - Quantum DXi6900 Field Service Manual

Chapter 1: Basic Operations
DXi6900 G1 Node
Table 2 Rear Panel Connectors
- DXi6900 G1
Indicator, Button, or
Item Connector
1 2 x 10 GbE (SFP+)
Ethernet ports
2 (Optional) 2 x 10 GbE
(SFP+) Ethernet ports or 4
x 1 1 GbE Ethernet ports
3 2 x 8 Gb Fibre Channel
ports or 2 x 16 Gb Fibre
Channel ports
4 4 x 6 Gb SAS ports
5 (Optional) 2 x 10 GBase-T
Ethernet port
6 4 x 6 Gb SAS ports
7 4 x 8 Gb Fibre Channel
ports or 2 x 16 Gb Fibre
Channel ports.
8 System identification
button
9 System identification
connector
10
iDRAC port
8
Icon Description
For data ingest/read.
For data ingest/read. For all DXi6900 G1
configuration options, see
For path to tape or VTL ingest/read.
For connection to Array modules (RBOD)s.
Note: The rightmost two ports are not used.
For data ingest/read.For all DXi6900 G1
configuration options, see
For connection to Array modules (RBOD)s.
Note: The rightmost two ports are not used.
For VTL ingest/read.
Press to toggle the system ID on and off.
The identification buttons on the front and back
panels can be used to locate a particular system
within a rack. When one of these buttons is
pressed, the LCD panel on the front and the
system status indicator on the back flashes until
one of the buttons is pressed again.
Not used.
For Quantum use only.
Table 3.
Table 3.
Quantum DXi6900 G1 User's Guide