Figure 145 Removing and
Installing the Control Panel
Figure 146 Removing and
Installing the Information Tag
Quantum DXi6900 G1 User's Guide
Control panel cable
USB cable
0
1
2
3
Control panel board
Control panel
4 Locate and press the tabs on the information tag (see
5 Push the information tag out of the slot to remove it from the
control panel.
Information tag
Replacing the Information Tag
To replace the information tag:
1 Replace the information tag from the failed Node chassis in the
control panel in the new Node chassis. To do this, push the
information tag into the control panel slot (see
Chapter 3: FRU Removal and Replacement Procedures
Additional Removal and Replacement Procedures
vFlash cable
Tabs
E S T
Screws
Figure
146).
Slot
Figure
146).
229