Audio Tones - Xerox Wide Format 6705 System User Manual

9.3.2

Audio Tones

You can use this feature to set whether to sound an alarm when a job ends or a fault occurs.
The factory default is [Normal] for all items.
Steps
St
1.
Press [Audio Tones].
2.
Set each item as necessary, and click [Close].
Item
Control Panel Select Tone
Control Panel Alert Tone
Base Tone
Machine Ready Tone
Job Complete Tone
Fault Tone
Auto Clear Alert Tone
"Supply Paper" Warning Tone
Low Toner Alert Tone
Originals Set Tone
Description
Set the volume of the beep that sounds when a button on the control
panel is correctly selected.
Set the volume of the beep that sounds when a button that cannot
be selected is selected, or an operation is performed while an error
occurs.
Set the volume of the beep that sounds at the home position of a
toggle button, which you can press repeatedly to switch between
selections.
This alarm also beeps when the <Interrupt> or <Copy from Memory>
mode is exited.
Set the volume of the beep that sounds when the machine is ready to
copy or print, for example, the power is turned on.
Set the volume of the beep that sounds when a job is completed
normally.
You can select the target jobs for which the beep is to sound.
Set the volume of the beep that sounds when a job fails.
You can select the target jobs for which the beep is to sound.
Set the volume of the beep that sounds five seconds before auto
clear.
Set the volume of the beep that sounds when a job is suspended
because there is no paper in a tray.
Set the volume of the beep that sounds when the toner cartridge
needs replacing.
Set the volume of the beep that sounds when an original is loaded.
Possible Value
Off, Soft, Normal,
Loud
Off, Soft, Normal,
Loud
Off, Soft, Normal,
Loud
Off, Soft, Normal,
Loud
Off, Soft, Normal,
Loud
Off, Soft, Normal,
Loud
Off, Soft, Normal,
Loud
Off, Soft, Normal,
Loud
Off, Soft, Normal,
Loud
Off, Soft, Normal,
Loud
9.3 Common Service Settings
9
291