Scanning Procedure; Step 1 Selecting The Feature - Xerox Wide Format 6705 System User Manual

3.1
This section describes the basic scanning procedure. Refer to the following subsections for more information on each
item:
Step 1 Selecting the Feature .............................................................................................................................................................p. 124

 Step 2 Starting the Scan Job.............................................................................................................................................................p. 127
 Step 3 Importing Scanned Data......................................................................................................................................................p. 128
3
3.1.1
You can select from the following three scan features:
 Store to Folder
 Scan to PC
 Multi Send Scan
The menu screen provides you with three scan feature buttons: [Store to Folder], [Scan to PC], and [Multi Send Scan].
Use these button to access the corresponding screen, where you can select the desired functions.
Store to Folder
Use this feature to read (scan) documents on the machine and store data in the machine's Folders. The stored
documents can be imported from a network-connected computer.
To use the Store to Folder feature, you must first set up your network. For information on how to configure

Refer
network settings, refer to "Setting Up the Store to Folder Feature" (p. 210).
The destination folder must be created before running a scan job. For information on how to create folders, refer

to "Create Folder" (p. 201).

3.1 Scanning Procedure

124

Scanning Procedure

Step 1 Selecting the Feature