Calling Up A Stored Program - Xerox Wide Format 6705 System User Manual

4.3
The following describes how to select a registered stored program.
Steps
St
1.
Press the <Services Home> button on the control panel.
2.
On the menu screen, press [Stored Copy Program] or [Stored Scan Program].
3.
Select the number of the stored program containing the
settings you want to call up.
4
Note
4.
After the stored program is called up from memory, set
other features as necessary.
Note
5.
Load your documents and run the copy or scan job.

4.3 Calling up a Stored Program

168
Calling up a Stored Program
Only the numbers that are registered can be

selected.
Press [ ] to display the previous screen, and

press [ ] to display the next screen.
If you want to display a specific stored program

number at the top, enter that number in [Go
to].
When the stored program has been called up, the number of the stored program is displayed for seven

seconds on the message area.