Making Adjustments To Color On The Original; Adjusting Individual Color Density (Adjust Color Density) - Xerox Wide Format 6705 System User Manual

2.4
The Color Board & Page Memory for IIT is required to use this feature.

Note
2.4.1
2
When copying a color document, this feature allows you to change the copy-density level for each of the color com-
ponents.
Steps
St
1.
On the menu screen, press [Copy].
2.
Press the [Image Quality] tab.
3.
Press [Adjust Color Density].
4.
Select the [Adjust] check box.
5.
Select density level for each color components.
6.
Set other features as necessary.
7.
Enter the number of copies using the numeric keypad.
8.
Load the document.

2.4 Making Adjustments to Color on the Original

84

Making Adjustments to Color on the Original

Adjusting Individual Color Density (Adjust Color Density)