Audio Tones; Audio Tones Overview - Xerox Versant 80 Press System Administration Manual

System Settings (Tools Administrator Mode)

Audio Tones

Audio Tones Overview

Use the Audio Tones feature to select whether or not to sound an alarm for various
machine functions; for example an alarm can be set to sound when a job ends or there
is a fault.
Note
All options include volume selections of Loud, Normal, and Soft. To disable the sound
for any option, select Off.
Options include:
Control Panel Select Tone
Select the volume level that sounds when a button on the UI is correctly selected.
Control Panel Alert Tone
Select the volume level that sounds when a non-functioning (or grayed-out) button is
selected or when an error occurs.
Base Tone
For a button that toggles (the setting changes each time it is pressed), select the volume
level that sounds when the button is in its initial (first) position. This is the sound made
when the Interrupt button is released.
Machine Ready Tone
Set the volume level that sounds when the machine is ready to copy or print or after
the machine powers on.
Job Complete Tone 1
Select the volume level that sounds when the machine successfully completes the
specific cycle, such as a copy job. The default setting is Copy.
Job Complete Tone 2
Select the volume level that sounds when the machine successfully completes the
specific cycle, such as a copy job. The default setting is Print Report.
Fault Tone
Select the volume level that sounds when there is an error termination.
Auto Clear Alert Tone
Select the volume level that sounds when the automatic clear feature is enabled.
Alert Tone
Select the volume level that sounds when a fault, such as a paper jam occurs, and the
fault is left unattended.
4-6 Xerox ® Versant ® 80 Press
System Administration Guide