System Administrator Menu Settings
Machine Clock
Allows you to set the date and time in the system clock of the machine. Specify Year, Month, Day,
Hours, and Minutes.
Time Zone
Allows you to set the time difference from GMT.
Set the time zone in the range of -12 to +12 in 30 minutes increments.
The factory default is 0 hours and 0 minutes.
Auto Power Saver
Set the time that must elapse from the last operation until the machine enters the Energy Saver
mode, in the range of 5 to 240 minutes in 1 minute increments.
The factory default is 60 minutes.
Note
You cannot disable the functionality of switching to the Energy Saver mode.
Auto Clear
Allows you to set the duration of time before the machine is automatically reset if no operation is
performed.
When you select On, specify a value between 30 seconds and 3 minutes in 30 second increments.
To disable this function, select Off.
The factory default is 1 min.
Backlight Off
Allows you to automatically turn off the backlight on the touch screen if the specified time has
elapsed with no operations performed.
Select Off or Same as Auto Clear. If Same as Auto Clear is selected, the touch screen goes dark
when the time specified in Auto Clear has elapsed.
The factory default is Off.
Audio Tones
You can use this feature to set whether to sound an alarm when a job ends or a fault occurs.
5-8
Xerox® Wide Format IJP 2000
User Guide