Power Source; Switching The Power On - Xerox Wide Format 6705 System User Manual

1.2

Power Source

1.2.1

Switching the Power On

The following describes how to switch the power on.
The machine warms up and becomes ready to copy or print within about 145 seconds after being powered on.
The Energy Saver feature allows you to reduce the power consumption of the machine, saving electricity.
Do not turn off the power straight after turning the power switch off. If you turn the power off before the menu

Important
screen is displayed on the touch screen, the system could be damaged.
The machine has a power consumption of 7W or less even when the power switch is turned off. To avoid

Note
consuming (or save) this standby power, turn the power breaker OFF. For information on how to do this, refer to
"Saving Power Consumption While the Machine is not in Use" (p. 35).
For information on the Energy Saver feature, refer to "Energy Saver Mode" (p. 36).

Refer
Steps
St
1.
Press the power switch to the [|] position to switch the power on.
The "Please wait..." message indicates that the machine

Note
is warming up. The machine cannot be used while it is
warming up.
1

1.2 Power Source

33