Audio Tones - Xerox DocuColor 5252 Administration Manual

To o l s M o d e

Audio Tones

Attention Tone
Button Selection Tone
Fault Tone
2 - 3 6
There are three types of audio tones that can be activated on the
digital press with scanner, as shown in the following table.
Tone
An unselectable button has been touched.
A selectable button has been touched.
The press is in a fault condition and cannot continue printing.
Each of these tones can be deactivated or set to Soft, Normal, or
Loud. The factory default setting is Normal.
1
Touch the Audio Tones button on the Machine Defaults 1 screen.
The Audio Tones screen appears.
2
Touch the button for the desired volume setting for each tone. To
deactivate a tone, touch the Off button for that tone.
3
Touch the Reset button to restore the factory default setting for the
three tones.
4
Touch the Close button to return to the Machine Defaults 1
screen.
What the Tone Indicates
D o c u C o l o r 5 2 5 2 S y s t e m A d m in is t r a t i o n G u i d e