Auto Mode Paper Type - Xerox Wide Format 6705 System User Manual

Steps
St
1.
Press [Variable Length Settings].
2.
Press the paper size to set.
3.
Enter the variable length value by using the numeric
keypad or by pressing [+] and [-].
4.
Press [Close].
9.4.6
You can use this feature to set the paper type used according to the original orientation, when running a copy job in
the auto mode.
The factory default is [Plain] for all sizes.
Steps
St
9
1.
Press [Auto Mode Paper Type].
2.
Select the original orientation.
3.
Press the paper size to set.
4.
Select the paper type from [Plain], [Tracing], [Film], and
[Any].
Note
5.
Press [Save].
9.4 Copy Service Settings
306

Auto Mode Paper Type

When an option other than [Any] is selected, a

paper run out error occurs if the specified type
of paper is not loaded in any tray.