Scan Speed (Specifying Scanning Speed) - Xerox Wide Format 6705 System User Manual

3.11.5
The following describes how to set slower scanning speed for additional reliability.
Steps
St
1.
Press [Scan Speed].
2.
Select the desired option.
Note
3
Color
When [Output Color] is set to [Color], you can adjust scan speed as shown in the table below.
Scan Speed
[Medium]
(67.6 mm/sec)
[Super Slow]
(33.8 mm/sec)
Yes: available — : unavailable
Other than full color
When [Output Color] is set to another option than [Color], you can adjust the scan speed as shown in the table
below.
Scan Speed
[Super Fast]
(203.2 mm/sec)
[Fast]
(101.6 mm/sec)
[Slow]
(50.8 mm/sec)
Yes: available
3.11 Scan - [Layout Adjustment] Screen
160

Scan Speed (Specifying Scanning Speed)

The selectable speeds vary depending on the

selected color mode and scan resolution.
If you have already chosen an option under

[Adjust Color Density], then the scan speed is
fixed to Super Slow (33.8 mm/sec). You cannot
change this setting.
Resolution
150 dpi
Yes
Yes
Resolution
150 dpi
Yes
Yes
Yes
— : unavailable
200 dpi 300 dpi
Yes Yes
Yes Yes
200 dpi 300 dpi
Yes Yes
Yes Yes
Yes Yes
400 dpi 600 dpi
— —
Yes Yes
400 dpi 600 dpi
— —
Yes Yes
Yes Yes