Adjusting Screen Brightness - Xerox Wide Format 6705 System User Manual

 Language
Allows you to select the display language.
This language setting is reset once the machine is turned off.
When you select English as the display language and entries such as Address Name contain characters other

Important
than ASCII, they may not be displayed appropriately.
The initial default language, which is displayed on the touch screen when the power is switched on, can be

Note
selected in [Default Language] under [System Settings]. For information on how to do this, refer to "Default
Language" (p. 292).
 Scan Sensor Gap Calibration
Allows you to calibrate the gap between scanning sensors with the calibration chart.
For more information, refer to "Calibrating the Scan Sensor Gap" (p. 57).

Note
1.5.1

Adjusting Screen Brightness

You can adjust the brightness of the touch screen.
Steps
St
1.
Press [Screen Brightness] on the [Services Home] screen.
2.
Press [+] or [-] to adjust the screen brightness.
3.
Press [Close].
1.5 [Services Home] Screen
1
43