Audio Tones - Xerox 770 Digital Color Press System Administration Manual

System Settings > Common Service Settings
• Auto Print
• Power Saver/Energy Saver Timers
• Printer Lockout Duration
• Time Zone
• Daylight Savings Time
6. Select Change Settings.
7. Select the desired setting for the option.
8. Select Save.
The previous screen is displayed.
9. If desired, select another option to set or change and repeat the previous steps.
10. Select Close.
The main Tools tab screen is displayed.
11. Exit administrator mode.

Audio Tones

Use the Audio Tones feature to select whether or not to sound an alarm for various
machine functions; for example an alarm can be set to sound when a job ends or there
is a fault. Options include:
Control Panel Select Tone
Select the volume level that sounds when a button on the UI is correctly selected. Select
from Loud, Normal, and Soft. To disable the sound, select Off.
Control Panel Alert Tone
Select the volume level that sounds when a non-functioning (or grayed-out) button is
selected or when an error occurs. Select from Loud, Normal, and Soft. To disable the
sound, select Off.
Base Tone
For a button that toggles (the setting changes each time it is pressed), select the volume
level that sounds when the button is in its initial (first) position. This is the sound made
when the Interrupt button is released. Select from Loud, Normal, and Soft. To disable
the sound, select Off.
Machine Ready Tone
Set the volume level that sounds when the machine is ready to copy or print or after
the machine powers on. Select from Loud, Normal, and Soft. To disable the sound,
select Off.
Job Complete Tone 1
Select the volume level that sounds when the machine successfully completes the
specific cycle, such as a copy job. Select from Loud, Normal, and Soft. To disable the
sound, select Off. The default setting is Copy.
2-4 ®
Xerox 770 Digital Color Press
System Administration Guide