Finding More; To Increase Duration Before Auto Clear - Xerox Wide Format 6705 System User Manual

8.12
Refer to these subsections.
 To Increase Duration Before Auto Clear.......................................................................................................................................p. 272
 To Increase Duration Before Energy Saver Mode Turns On (Changing Energy Saver Timers) ...............................p. 274
 To Customize the Default Screen ....................................................................................................................................................p. 275
 To Display the Auto Mode Screen by Default.............................................................................................................................p. 276
 To Go to the Target Screen with a Single Button Press (Assigning the Custom Buttons).........................................p. 277
 To Change the Default Output File Format of Scanned Data .............................................................................................p. 278
 To Calibrate Gaps Appearing on the Copied or Scanned Output.......................................................................................p. 279
8.12.1
When no operation is performed for a certain period, the machine is automatically reset (auto clear).
The following describes how to increase the duration of time before auto clear.
8
Steps
St
1.
Press the <Log In/Out> button on the control panel.
2.
Enter the user ID of the system administrator, by using
the numeric keypad or the keyboard displayed on the
screen, and press [Enter].
Note

8.12 Finding More

272

Finding More

To Increase Duration Before Auto Clear

By factory default, the User ID is "11111".

Copy (Not In Use) Review
Services Home
ABC DEF
1 2 3
Clear All
Job Status
GHI JKL MNO
4 5 6
Interrupt
PQRS TUV WXYZ
7 8 9
Machine Status
0
＃
Dial Pause Speed Dial
C Start
<Log In / Out> button
Log In / Out
Energy Saver
Stop