Color Scanning (Selecting The Color Mode For Scanning) - Xerox Wide Format 6705 System User Manual

3.7.3
The following describes how to set the color mode for scanning documents.
Steps
St
1.
Select a color mode.
Note
3
Color
Select this to scan documents in the full color mode.
Note
Grayscale
Select this to scan documents using the 256 levels of black and white. The file size of scanned data will be larger
than that scanned with Black & White or Halftone.
Note
Black & White
Select this to scan standard documents and drawings. The file size of scanned data will be smaller than that
scanned with Halftone or Grayscale.
Note
Halftone
Select this to scan halftone documents.
Note
3.7 [Store to Folder] Screen
138

Color Scanning (Selecting the Color Mode for Scanning)

The Color Board & Page Memory for

IIT is required to use the full color (Color) and
256 levels grayscale (Grayscale) options.
The standard setting is [Halftone] (pseudo grey

scale (binary)).
When [Resolution] is set to 400 dpi or higher,

then you cannot change the setting for [Scan
Speed]. The setting is fixed to Super Slow (33.8
mm/sec).
[Text & Line], [Blueprint], [Transparent], and [Uneven-Toned Background] under [Original Type] cannot be

selected.
[Threshold Sort] cannot be selected.

[Threshold Sort] cannot be selected.

[Printed Original] and [Photograph] under [Original Type] cannot be selected.

[Threshold Sort] cannot be selected.
