Printing Using The Print Driver - Xerox Wide Format 6705 System User Manual

2.
Check that the LPD port is set to [Enabled].
Refer
3.
Set the IP address.
You can skip this step when the machine is already assigned an IP address.
Refer
4.
Press [Close] several times until the [Tools] screen is displayed.
5.
Press [Close].
Note
6.
Configure other LPD settings as necessary.
5
Step 3 Setting on your computer
Before you can print on the machine from your computer, you need to install the print driver and the required
applications on your computer.
Print drivers are available on xerox.com.

Refer
For information on how to install BT-PlotAssistant, refer to "BT-PlotAssistant User Guide".

5.3.4
The following describes how to print using the print driver.
The print procedure varies depending on the application being used. For details, refer to the documentation for your
application.
The following describes as an example how to print from Windows WordPad.
For information on the Print features, refer to the print driver help that is displayed when you click [Help] on the

Refer
print driver screen.
Steps
St
1.
From the [File] menu of your application, select [Print].
2.
Select [Xerox Wide Format 6705 System], and click [Preferences] as necessary.
5.3 Printing
178
For information on how to set the LPD port, refer to "Port Settings" (p. 310).

For information on how to assign an IP address to the machine, refer to "Protocol Settings" (p. 311).

Rebooting the machine may be required depending on the settings. When a message displayed on the

screen, follow the message and reboot the machine.

Printing Using the Print Driver