Xerox Wide Format 6705 System User Manual page 250

Symptom
The copied/
scanned/printed
output is too light.
The copied/
scanned/printed
image is
misaligned or
skewed.
8
Part of the image
is missing on the
copied/printed
output.
(smudged or
unclear)
Dirt appears at
regular intervals.
8.4 Image Quality Problems
250
Check
Is the copy density set to
[Lighten]?
Is Copy Density or Lighten /
Darken set to [Lighten]?
Is the setting for the original type
appropriate?
Is the document loaded correctly?
Is the document guide set
properly?
Is the media damp?
Is the loaded media folded or
wrinkled?
Is part of the image outside of the
printable area?
Is the paper path dirty?
Internal components are soiled.
Remedy
Make adjustments under Copy Density and/or Lighten / Darken.
For a copy job, refer to "Image Options

Refer
(Adjusting the density, sharpness, and contrast
of images)" (p. 109).
For a scan job, refer to "Image Options

(Adjusting the Scan Density, and Sharpness and
Contrast of Images)" (p. 152).
Select a suitable original type.
For a copy job, refer to "Original Type (Selecting

Refer
the Document Type)" (p. 108).
For a scan job, refer to "Original Type (Selecting

the Document Type)" (p. 139).
Correctly load the document.
For a copy job, refer to "Step 3 Starting the Copy

Refer
Job" (p. 80).
For a scan job, refer to "Step 2 Starting the Scan

Job" (p. 127).
Set the document guide correctly.
For a copy job, refer to "Step 3 Starting the Copy

Refer
Job" (p. 80).
For a scan job, refer to "Step 2 Starting the Scan

Job" (p. 127).
If the media is damp, some parts of the copied output may not
be printed or may be unclear. Replace with media just unpacked.
Refer to "Loading/Replacing Paper" (p. 45).

Refer
Remove the defective media or replace with media just unpacked.
Refer to "Loading/Replacing Paper" (p. 45).

Refer
Recreate the original so that the image fit to the printable area.
Refer to "Image loss width" in "Specifications" (p.

Refer
344).
Run a copy job of a few pages.
If the symptom does not improve, contact your local Xerox repre-
sentative.
Contact your local Xerox representative.