To Display The Auto Mode Screen By Default - Xerox Wide Format 6705 System User Manual

8.12.4
The following describes how to display the Auto copy mode screen by default.
Steps
St
1.
Press the <Log In/Out> button on the control panel.
2.
Enter the user ID of the system administrator, by using the numeric keypad or the keyboard displayed on the
screen, and press [Enter].
Note
3.
On the menu screen, press [Tools].
4.
Press [System Settings] > [Copy Service Settings] > [Copy Defaults].
5.
Select the [Auto Mode] check box, and press the <Start>
button.
8
8.12 Finding More
276

To Display the Auto Mode Screen by Default

By factory default, the User ID is "11111".
