Xerox Wide Format 6705 System User Manual page 251

Symptom
Unwanted black Internal components are soiled.
dots are printed.
Unwanted black Is the surface of the scanning
lines are printed. glass dirty?
Internal components are soiled.
Unwanted white Is the appropriate type of media
dots appear in
being used?
black filled areas.
Internal components are soiled.
Printed toner Is the media damp?
smudges when
rubbed with your
finger.
Toner is not fused
Is the appropriate type of media
to the paper.
being used?
The paper is soiled
with toner.
Are the media settings
appropriate?
The entire area of High-voltage power supply may
the output paper is have malfunctioned.
black.
Check
Contact your local Xerox representative.
Clean the surface of the scanning glass.
Refer
Contact your local Xerox representative.
Load the appropriate type of media.
Refer
Contact your local Xerox representative.
Replace with media just unpacked.
Refer
Load the appropriate type of media.
Refer
Select appropriate media.
Refer
Contact your local Xerox representative.
Remedy
Refer to "Cleaning the Machine" (p. 62).

Refer to "Media Types" (p. 73).

Refer to "Loading/Replacing Paper" (p. 45).

Refer to "Media Types" (p. 73).

Refer to "Loading/Replacing Paper" (p. 45).

8.4 Image Quality Problems
8
251