Image Options (Adjusting The Scan Density, And Sharpness And Contrast Of Images) - Xerox Wide Format 6705 System User Manual

3.10.1
The following describes how to adjust the scan density, and sharpness and contrast of images, when running a scan
job.
Steps
St
1.
Press [Image Options].
2.
Make adjustments for the desired items.
3
Lighten / Darken
Select from nine scan density levels between [Lighten] and
[Darken].
To increase the density level on the scanned output, select a
level closer to [Darken]. To decrease the density level, select
a level closer to [Lighten].
Sharpness
Select from five sharpness levels between [Sharpen] and
[Soften].
To enhance edges on the copied output, select a level closer
to [Sharpen]. To soften edges, select a level closer to [Soften].
Contrast
Select from five contrast levels between [More] and [Less].
To increase the difference between light and dark areas, or to make the darker areas darker and the lighter areas
lighter, select a level closer to [More]. To decrease the difference between light and dark areas, select a level closer
to [Less].
3.10 Scan - [Advanced Settings] Screen
152
Image Options (Adjusting the Scan Density, and Sharpness and
Contrast of Images)