Importing From Stored File Manager 3 - Xerox Wide Format 6705 System User Manual

5.5.2
The following describes how to import the documents stored in the machine's folder into your computer via Stored
File Manager 3.
Stored File Manager 3 allows you to import the documents stored in the machine's folder into your computer
without an application.
To use Stored File Manager 3, the scanner driver (to connect to network) must be installed on the computer.
You can install the scanner driver (to connect to network) from xerox.com.

Note
Before you can import documents from the machine's folder, you need to configure some settings such as

enabling a port.
For information on how to do this, refer to "Setting Up the Store to Folder Feature" (p. 210). For information on
how to work with your application, refer to the documentation for the application.
For detailed information on items displayed in the dialog box, refer to the Help section of Stored File Manager 3

Refer
which can be displayed by clicking [Help].
5
Steps
St
1.
Click the [Start] menu, and select [Programs] > [Xerox] > [Network Scanner Utility 3] > [Stored File Manager
3].
Note
2.
From the displayed list, click the scanner name of the
machine to connect, and click the [Next] button.
Note
5.5 Importing Scanned Data
194

Importing from Stored File Manager 3

If you used another directory for installation, specify the directory instead.

If no scanners are shown in the list, click

[Search Again]. The application searches for
scanners.
To change the display of scanner names, use

the dialog box which can be displayed by
clicking the [Search / Display Settings]
button. For information on how to change
the display name, refer to "Changing the
display of scanner names" (p. 196).
The scanner name of the machine is

automatically listed only when the machine
is on the same network as your computer. To view the machine connected to another network, click
[Search / Display Settings] to register the machine's IP address and scanner name. For information on
how to register a scanner, refer to "Changing the display of scanner names" (p. 196).