Printable Data Format; Preparation For Printing - Xerox Wide Format 6705 System User Manual

5.3.2

Printable Data Format

The table below lists data formats that can be submitted from your computer to the machine.
Data Type
HP-GL series HP-GL, HP-GL/2, HP-RTL
VERSATEC series VRF, VCGL, FX-MMR
TIFF/JFIF series TIFF Version 6.0 compliant or JFIF Version 1.02 compliant data
CALS series CALS Type1
CGM series Version 1 + PIP Profile Not Supported
PS/PDF series
PostScript
PS/PDF series are

Note
5.3.3

Preparation for Printing

The following describes preparation steps to print with TCP/IP. Refer to these subsections for more information on
each step.
 Step 1 Requirements ............................................................................................................................................................................p. 177
 Step 2 Setting on the machine.........................................................................................................................................................p. 177
 Step 3 Setting on your computer ....................................................................................................................................................p. 178
Step 1 Requirements
The following is a prerequisite to using the machine with TCP/IP (LPD):
 Network environment supporting TCP/IP
Step 2 Setting on the machine
The following describes how to configure the settings on the machine in order to use the machine with TCP/IP (LPD).
CentreWare Internet Services can also be used to make these settings. For details, refer to the Help section which

Note
can be displayed by clicking [Help] in the upper right of the CentreWare Internet Services screen.
Steps
St
1.
Call up the [Tools] screen.
(1)
Press the <Log In/Out> button.
(2)
Enter the user ID of the system administrator, by using the numeric keypad or the keyboard displayed
on the screen, and press [Enter].

Note
(3)
On the menu screen, press [Tools].
Printable Data Format
®
TM
3 Version 3017, PDF Version 1.7
included in standard configuration
By factory default, the User ID is "11111".
.
5
5.3 Printing
177