Setting Up The Scan To Pc Feature - Xerox Wide Format 6705 System User Manual

6.3.2

Setting Up the Scan to PC Feature

The following describes how to set up the Scan to PC feature. Refer to these subsections for more information on
each step.
 Step 1 Requirements ............................................................................................................................................................................p. 211
 Step 2 Configuring TCP/IP .................................................................................................................................................................p. 211
 Step 3 Setting on your computer ....................................................................................................................................................p. 211
Step 1 Requirements
To use the Scan to PC feature on the machine, your computer must run on one of the following operating systems
that supports folder sharing.
® ®
 Microsoft Windows XP
®
 Microsoft Windows Vista
® ®
 Microsoft Windows 7
®
 Microsoft Windows Server
®
 Microsoft Windows Server
®
 Microsoft Windows Server
Step 2 Configuring TCP/IP
To use Scan to PC feature, the machine's IP address must be configured.
You can skip this step when the machine is already assigned an IP address.

Note
For information on how to assign an IP address to the machine, refer to "Setting the IP Address" (p. 209).

Refer
Step 3 Setting on your computer
Create a transfer destination folder on your computer and set it as a shared folder. Set write access to the shared
folder.
 Setting Up the Shared Folder
Steps
St
1.
Anywhere on your computer, create a folder to be shared.
The created folder will be used to store scanned data.

Note
Give the folder a name such as "scan001", using single-byte alphanumeric characters.
2.
Right-click on the folder, and select [Properties].
®
®
2003
®
2008
®
2008 R2
6.3 Scanner Environment Settings
6
211