Xerox Wide Format 6705 System User Manual page 263

Status
Scanned data is not sent to
the save destination
although no error message is
displayed.
After you press the <Job
Status> button on the control
panel, the status "Completed
-Error" is displayed for the
Scan to PC or Multi Send Scan
job.
Cause
A submission error occurred during a Scan to
PC or Multi Send Scan job.
Write permissions are not enabled on the

save destination.
Insufficient storage space of the save

destination.
Failed to write to the destination disk.

Other failures such as a communication

error (including LAN failure such as
disconnection and bad connection of cables,
disk error).
Remedy
Clear the causes shown to the left, and

run the scan job again.
8.9 Error Messages
8
263