Multi Send Scan] Screen - Xerox Wide Format 6705 System User Manual

3.9
This section describes how to select functions on the [Multi Send Scan] screen. Use this feature to store scanned data
on computers (servers) registered as a group address, and print them on a printer.
When you select a printer as part of the destinations, TIFF or JPEG files will be transferred to the printer,

Note
regardless of the file format specified under [File Format]. For information on how to select TIFF or JPEG as the
file format to be used, refer to "Multi Send Printer Transfer Format" (p. 321).
To use the Multi Send Scan feature, you must first set up your network. For information on how to configure

Refer
network settings, refer to "Setting Up the Scan to PC Feature" (p. 211).
3
The destination group address must be registered before running a scan job. For information on how to register a

group address, refer to "Multi Send Address (Group Address)" (p. 206).
The following describes the [Multi Send Scan] screen. Refer to the following subsection:
 Multi Send Address (Specifying the Destination).....................................................................................................................p. 149
Steps
St
1.
On the menu screen, press [Multi Send Scan].
2.
Select the desired function on the [Multi Send Scan]
screen.
Note

3.9 [Multi Send Scan] Screen

148

[Multi Send Scan] Screen

The following functions are equivalent to those

displayed on the [Store to Folder] screen. For
information on how to do this, refer to "[Store to
Folder] Screen" (p. 135).
Color Scanning Mode

Resolution

Original Type

Output File Format
