2. Insert flat end of tool (A) into latch (B) and turn it
counterclockwise to unlock.
3. Pull top of driveshield (A) away from header to open.
NOTE:
For improved access, lift driveshield off the pins at the
base of the shield, and lay the shield on the header.
3.7.2 Closing Driveshields
CAUTION
Do NOT operate the machine without the driveshields in place and secured.
NOTE:
Images shown are for left driveshield—right driveshield is similar.
214077
OPERATION
Figure 3.92: Driveshield Latch
Figure 3.93: Left Driveshield
63
B
A
A
Revision A