Attaching Hydraulics And Electrical Connections; Connecting R1 Series Hydraulics And Electrical: M1170 Windrowers - MacDon R113 Operator's Manual

3.5.4 Attaching Hydraulics and Electrical Connections

The procedure for attaching the header hydraulic and electrical connections depends on the windrower model.
Refer to the appropriate procedure:
•
Connecting R1 Series Hydraulics and Electrical: M1170 Windrowers, page 42
•
Connecting R1 Series Hydraulics and Electrical: M155E4 Windrowers, page 44

Connecting R1 Series Hydraulics and Electrical: M1170 Windrowers

NOTE:
Hydraulic drive kit (A) (MD #B6271) is required for a R113
13-foot self-propelled disc header to operate correctly on a
M1170 Self-Propelled Windrower. To order this kit, contact
your MacDon Dealer.
1. Move the windrower's left-side (cab-forward)
platform (A) to the OPEN position. Refer to your
windrower operator's manual for instructions.
2. Retrieve hydraulic hoses from header.
214077
OPERATION
Figure 3.48: Hydraulic Drive Kit (MD #B6271)
Figure 3.49: Windrower Left Platform in Open
Position
42
A
A
Revision A