Detaching R1 Series Header: M155E4 Windrower - MacDon R113 Operator's Manual

20. Back the windrower slowly away from header.
21. Reinstall clevis pin (A) through support (C) and secure
with hairpin (B). Repeat for opposite side.

3.6.2 Detaching R1 Series Header: M155E4 Windrower

DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and
remove the key from the ignition before leaving the operator's seat for any reason.
1. Lower the header to the ground. If the ground is soft, place blocks under the header.
2. Stop the engine and remove the key.
3. Move the left side (cab-forward) platform (A) to the
open position.
214077
OPERATION
Figure 3.82: Header Support
Figure 3.83: Windrower LH Platform
58
C
B
A
A
Revision A