Installing Cutterbar Spindle Shear Pin - MacDon R113 Operator's Manual

12. Use the safecut spindle-nut wrench and remove nut (A).
13. Remove the hub (A).
14. Remove shear pins (B). Do NOT damage the pin bore
on the pinion.
NOTE:
Check the nut and hub for damage. Replace if
necessary.

Installing Cutterbar Spindle Shear Pin

DANGER
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
from ignition before leaving operator's seat for any reason.
CAUTION
Discblades have two sharp cutting edges that can cause serious injury. Exercise caution and wear gloves
when working with blades.
214077
MAINTENANCE AND SERVICING
Figure 4.102: Cutterbar Spindle
Figure 4.103: Cutterbar Spindle
152
B
A
A
Revision A