MacDon R113 Operator's Manual page 180

1. Remove driveshield (A). Refer to
Driveshields, page 165.
2. Remove hex nut (A) and flat washer securing latch to
backside of driveshield, replace latch if worn or
damaged, and reinstall nut and washer.
3. Remove two carriage bolts (A), replace stud and clip
assembly (B) if worn or damaged, and reinstall
carriage bolts.
4. Install driveshield. Refer to
166.
214077
MAINTENANCE AND SERVICING
Removing
Installing Driveshields, page
Figure 4.136: Driveshield
Figure 4.137: Backside of Driveshield
A
Figure 4.138: Stud and Clip Assembly
168
A
A
B
Revision A