MacDon R113 Operator's Manual page 58

3. Move hose bundle (A) from the windrower and rest the
bundle on the header.
4. Position the hose support with lower bolt (A) in the
forward hole as shown in Figure
both bolts and adjust as required.
5. Install hose support (A) from kit with supplied
hardware (B) onto header.
214077
OPERATION
3.58, page 46. Loosen
46
A
Figure 3.57: Hose Bundle
A
Figure 3.58: Hose Support
B
Figure 3.59: Hose Support
A
B
Revision A