Conditioners; Roll Conditioner - MacDon R113 Operator's Manual

4.7.6 Conditioners

Roll Conditioner

Rolls condition the crop by crimping and crushing the stem in several places, which allows the release of moisture
resulting in faster drying times. Both steel and polyurethane conditioner rolls are available. Refer to
Attachments, page 181
Inspecting Roll Conditioner
DANGER
To avoid bodily injury or death from unexpected start-up or fall of a raised machine, stop engine, remove
key, and engage windrower lift cylinder safety props before going under machine for any reason.
CAUTION
Exercise caution when working around the blades. Blades are sharp and can cause serious injury. Wear
gloves when handling blades.
1. Lower self-propelled disc header fully, stop engine, and
remove key.
2. Engage windrower lift cylinder safety props. Refer to
Engaging and Disengaging Header Safety Props, page
24.
3. Remove left and right driveshields (A). Refer to
Opening Driveshields, page
4. Inspect left side roll conditioner bearing (A) for signs of
wear or damage.
214077
MAINTENANCE AND SERVICING
for ordering information.
62.
A
3.3
3.7.1
Figure 4.139: Driveshields
A
Figure 4.140: Left Side Roll Conditioner Bearing
169
5.1 Options and
A
Revision A