Inspecting Discblade Hardware - MacDon R113 Operator's Manual

IMPORTANT:
The discblades have cutting edges on both sides so the
blades can be turned over and reused. The twist in each
blade determines the cutting direction.

Inspecting Discblade Hardware

CAUTION
Damaged or loose discblades or blade attachment hardware can be ejected during machine operation and
may cause personal injury or machine damage.
Inspect blade attachment hardware each time blades are changed.
214077
MAINTENANCE AND SERVICING
Figure 4.45: Counterclockwise Disc Rotation
Direction
Figure 4.46: Clockwise Disc Rotation Direction
127
Revision A