MacDon R113 Operator's Manual page 160

5. Install eight M8 bolts (A) and washers to secure the
cover to the non-driven drum, and torque to 28 Nm
(20 lbf·ft).
NOTE:
Arrow in illustration points to the front of the machine.
WARNING
Ensure cutterbar is completely clear of foreign objects.
Foreign objects can be ejected with considerable force
when the machine is started and may result in serious
injury or machine damage.
6. Close cutterbar doors (A). Refer to
Cutterbar Doors, page
214077
MAINTENANCE AND SERVICING
3.8.4 Closing
68.
Figure 4.93: Non-Driven Drum Cover (Top View)
A
Figure 4.94: Cutterbar Doors in Closed Position
148
A
Revision A