MacDon R113 Operator's Manual page 133

4. Determine suitable spindle rotation pattern for crop
conditions. Refer to
5. Ensure that spindle O-ring (A) is properly seated,
cleaned, and undamaged.
6. Insert spindle (A) into cutterbar.
214077
MAINTENANCE AND SERVICING
4.5.2 Cutterbar Spindles, page 116.
Figure 4.31: 13- and 16-Foot Cutterbars
Figure 4.32: Left-Hand Spindle O-Ring
Figure 4.33: Left-Hand Spindle
121
A
A
Revision A