MacDon R113 Operator's Manual page 55

3. Attach hose support (A) to windrower frame near left
cab-forward leg, and route hose bundle under frame.
NOTE:
Route hoses as straight as possible and avoid rub/wear
points that could damage hydraulic hoses.
4. Rest hose bundle routed from windrower on header's
hose support (A).
5. If necessary, use a clean rag to remove dirt and
moisture from the couplers.
6. Connect header hydraulic hoses and electrical harness
included in B6271 to header motor as follows:
a. Connect pressure hose to receptacle (A).
b. Connect return hose to receptacle (B).
c. Connect case drain hose to receptacle (C).
d. Connect the electrical harness to windrower
electrical harness (D).
214077
OPERATION
Figure 3.50: Hose Support Attachment
Figure 3.51: Hose Support
Figure 3.52: Header Hydraulics and Electrical
Connections
43
A
A
A
D
C
B
Revision A