MacDon R113 Operator's Manual page 38

3. Pull lever (A) and rotate toward header to lower safety
prop (B) onto cylinder. Repeat for opposite cylinder.
Disengage safety props as follows:
1. Turn lever (A) away from header to raise safety prop
until lever locks into vertical position. Repeat for
opposite cylinder.
2. Start engine, choose a level area, and lower header to
the ground.
3. Stop the engine and remove the key.
214077
OPERATION
Figure 3.8: Safety Prop
Figure 3.9: Safety Prop
26
A
B
A
Revision A