MacDon R113 Operator's Manual page 72

7. Disconnect the following hoses from the
hydraulic motor:
•
Return hose (A)
•
Pressure hose (B)
•
Case drain hose (C)
8. Install caps on the connectors and hose ends (if
equipped) to prevent buildup of dirt and debris.
9. Disconnect the electrical connector (A) by turning the
collar counterclockwise and pulling connector to
disengage.
NOTE:
Hydraulic lines and hoses hidden on illustration to show
the electrical connection.
214077
OPERATION
A
Figure 3.86: Hose Bundle
Figure 3.87: Electrical Connection
60
C
B
D
A
D
D
D
Revision A