MacDon R113 Operator's Manual page 114

Action
Lube roller conditioner bearings. Refer
S
to 4.4 Lubrication, page
Lube conditioner roll driveline
S
slip joints. Refer to
page 105.
First 50 hours
Check conditioner drive belt tension.
ü
Refer to Inspecting Conditioner Drive
Belt, page 157.
Change cutterbar lubricant. Refer to
▲
3.12 Cutterbar Lubrication, page 73
Change roll timing gearbox lubricant.
▲
Refer to Checking and Changing Roll
Timing Gearbox Oil, page
Change header drive gearbox
▲
lubricant. Refer to
Adding Lubricant, page
Every 100 hours or annually
Check conditioner drive belt tension.
ü
Refer to Inspecting Conditioner Drive
Belt, page 157.
Check roll timing gearbox lubricant.
ü
Refer to Checking and Changing Roll
Timing Gearbox Oil, page
Check header drive gearbox lubricant.
ü
Refer to 4.6.1 Checking and Adding
Lubricant, page 156.
First 150 hours
Change cutterbar lubricant. Refer to
▲
3.12 Cutterbar Lubrication, page 73
Change roll timing gearbox lubricant.
▲
Refer to Checking and Changing Roll
Timing Gearbox Oil, page
Change header drive gearbox
▲
lubricant. Refer to
Adding Lubricant, page
Every 250 hours 4
Change cutterbar lubricant. Refer to
▲
3.12 Cutterbar Lubrication, page 73
3. Use only the specified amount. Do NOT overfill
4. Begins after the first 150 hour service
214077
MAINTENANCE AND SERVICING
ü ü Check
105.
4.4 Lubrication,
3 .
161.
4.6.1 Checking and
156.
161.
3 .
161.
4.6.1 Checking and
156.
3 .
S S Lubricate
102
▲ Change
Revision A