Installing Driveshields - MacDon R113 Operator's Manual

2. Insert flat end of tool (A) into latch (B) and turn it
counterclockwise to unlock.
3. Pull top of driveshield (A) away from header conditioner
and lift off the pins at the base of the shield to remove.

Installing Driveshields

CAUTION
Do NOT operate the machine without the driveshields in place and secured.
NOTE:
Images shown are for left side driveshield—right side driveshield is similar.
214077
MAINTENANCE AND SERVICING
Figure 4.132: Tool to Unlock Driveshield
and Latch
Figure 4.133: Driveshield
166
B
A
A
Revision A